DMC:V2500-A0-73-13-4100-00A-810A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 73-13-41-550-001 Fuel Nozzle And Support Assembly - Put Into Storage
General
NOTE
To identify the consumable materials, refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 10-042 OIL | LOCAL | CoMat 10-042 | ||
| CoMat 10-069 CALIBRATING FLUID | LOCAL | CoMat 10-069 |
Spares
NONESafety Requirements
NONEProcedure
Flush the assembly with CoMat 10-069 CALIBRATING FLUID.
NOTE
If CoMat 10-069 CALIBRATING FLUID is not available, use CoMat 10-042 OIL.Drain the unwanted fluid.
Install transportation caps on to the fuel inlet fitting and baffle (air swirler).
SUBTASK 73-13-41-550-051 Prepare the Fuel Nozzle and Support Assembly for Storage