TASK 73-13-43-100-401 Clean The Fuel Distribution Valve Front Support, Cleaning-001

DMC:V2500-A0-73-13-4300-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 73-13-43-100-401 Clean The Fuel Distribution Valve Front Support, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-042

2A2535

General

This TASK gives the procedure to clean the fuel distribution valve front support. For other parts of the fuel distribution valve, refer to Cleaning-000 TASK 73-13-43-100-400.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary numbers are used. For the service bulletin alpha variants, refer to the IPC.

References

Refer to SPM TASK 70-10-00-100-501 Cleaning - General information.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 73-13-43-110-002-001 Remove the Grease and Unwanted Particles

      1. Remove the grease and unwanted particles. Refer to SPM TASK 70-11-03-300-503.

      2. Moderate cleaning.

    1. SUBTASK 73-13-43-110-002-002 Remove the Grease and Unwanted Particles

      1. Remove the grease and unwanted particles. Refer to SPM TASK 70-11-01-300-503.

      2. Vapor degreasing.

Requirements After Job Completion

Follow-On Conditions

NONE