TASK 73-22-15-500-401 P3/T3 Sensor - Related Parts - Store The P3/T3 Sensor, Storage-001

DMC:V2500-A0-73-22-1500-00A-810A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 73-22-15-500-401 P3/T3 Sensor - Related Parts - Store The P3/T3 Sensor, Storage-001

General

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-095 POLYETHYLENE PREFORMEDBAGSLOCALCoMat 02-095

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 73-22-15-550-051 Store the P3/T3 Sensor

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:CoMat 02-095
Type:sp01
Supply Short Name:CoMat 02-095 POLYETHYLENE PREFORMED BAGS
Supply Name:CoMat 02-095 POLYETHYLENE PREFORMEDBAGS
Specification Groups:
Doc NumberType
PMC 4215POLYETHYLENE BAG WITH ZIP-LOCK, SLIDE-LOCK TYPE CLOSURE OR OPEN END BAG (0.002 INCH (0,51 MM) MINIMUM THICKNESS)
Suppliers:
ManufacturerRemarks
LOCAL