Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 73-22-34-100-301 EEC Terminal Block Assembly - Clean The Block Assembly, Cleaning-001
General
This TASK gives the procedure to clean the terminal block assembly. For the other parts of the electronic engine control system refer to TASK 73-22-34-100-300.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used.
To identify the consumable materials refer to the PCI.
References
Refer to the SPM for data on these items.
Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-002 SOLVENT, DELETED. | X111X | CoMat 01-002 | ||
| CoMat 02-099 LINT-FREE CLOTH | X222X | CoMat 02-099 | ||
| CoMat 02-102 BRUSH, PAINT | LOCAL | CoMat 02-102 |
Spares
NONESafety Requirements
NONEProcedure
Use a clean piece of the CoMat 02-099 LINT-FREE CLOTH.
Remove the dirty cleaning fluid from the component before it is dry.
Dry the component.
Use the CoMat 01-002 SOLVENT, DELETED. and a CoMat 02-102 BRUSH, PAINT.
Remove all the contamination not removed in Step.
Clean around the contours of the component.
Use a clean piece of the CoMat 02-099 LINT-FREE CLOTH.
Remove the dirty cleaning fluid from the component before it is dry.
Dry the component.
SUBTASK 73-22-34-110-055 Clean the Terminal Block Assembly
WARNING
DO NOT GET THE CLEANING FLUID ON YOUR SKIN OR IN YOUR EYES. PUT ON APPLICABLE CLOTHING, GLOVES, GOGGLES AND A MASK. USE THE CLEANING FLUID IN AN AREA WITH A GOOD FLOW OF AIR. DO NOT BREATHE THE VAPOR. IF YOU GET THE CLEANING FLUID ON YOUR SKIN OR IN YOUR EYES, FLUSH IT AWAY WITH WATER. GET MEDICAL AID IF IT HAS AN EFFECT ON YOUR SKIN OR EYES.