DMC:V2500-A0-75-00-4900-00A-649A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 75-00-49-300-010 Engine Air Off-Take Ducts - Related Parts - Blend Damaged Surface Of The Bracket, Repair-010 (VRS1641)
General
Price and availability - none
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
To identify the consumable materials refer to the PCI.
For the method to clean the parts, refer to Cleaning-000 TASK 75-22-49-100-400.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 05-020 WATERPROOF SILICON CARBIDE | LOCAL | CoMat 05-020 | ||
| CoMat 05-021 WATERPROOF SILICON CARBIDE | 44197 | CoMat 05-021 |
Spares
NONESafety Requirements
NONEProcedure
Refer to Figure.
Use portable grinding equipment.
Dress until all damage is removed.
Dress to remove damage
Refer to Figure.
Refer to SPM TASK 70-35-03-300-501.
Blend dressed area
SUBTASK 75-00-49-350-057 Blend the Damaged Surface of the Bracket (01-670)
Refer to Figure.
If the blended area exceeds the blend limit given in Figure, reject the bracket
Examine the repaired area of bracket.
Refer to Inspection-000 TASK 75-00-49-200-400.
Use 8X magnifying glass
Visually examine the bracket.
SUBTASK 75-00-49-220-068 Examine the Bracket (01-670)
Figure: Blend Limit of the Bracket
Blend Limit of the Bracket
