DMC:V2500-A0-75-24-4800-00A-830A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 75-24-48-550-101 HPT ACC Air Manifold and Tube Assembly - Make the Manifold and Tube Assembly Ready for Storage, Storage-001
General
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 12-013 PRINTED, WAXED, VCI COATED PAPER | LOCAL | CoMat 12-013 | ||
| CoMat 12-004 P.V.C. SHEET | LOCAL | CoMat 12-004 | ||
| CoMat 02-099 LINT-FREE CLOTH | LOCAL | CoMat 02-099 | ||
| CoMat 12-009 KRAFT PAPER TAPE | LOCAL | CoMat 12-009 |
Spares
NONESafety Requirements
NONEProcedure
Make clean the external surfaces of the HP ACC manifold assembly with CoMat 02-099 LINT-FREE CLOTH.
Seal the air inlet hole of the HP ACC manifold assembly with CoMat 12-013 PRINTED, WAXED, VCI COATED PAPER. Hold the impregnated paper with CoMat 12-009 KRAFT PAPER TAPE.
Put the HP ACC manifold assembly on to a CoMat 12-004 P.V.C. SHEET. Fold the PVC sheet around the assembly and hold the PVC sheet with CoMat 12-009 KRAFT PAPER TAPE.
Keep the HP ACC manifold assembly in a dry area at room temperature.
SUBTASK 75-24-48-550-051 Make the HP ACC Manifold Ready for Storage