TASK 75-24-49-550-101 LPT ACC Air Ducts And Tubes - Put The ACC Ducts And Tubes Into Storage, Storage-001

DMC:V2500-A0-75-24-4900-00A-830A-C|Issue No:002.00|Issue Date:2019-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 75-24-49-550-101 LPT ACC Air Ducts And Tubes - Put The ACC Ducts And Tubes Into Storage, Storage-001

General

NOTE

Special tools are identified in the procedure by the tool primary number.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
IAE 1M14084 Support fixture0AM53IAE 1M140841

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 75-24-49-440-051 Install the Upper Cooling Air Manifold to the Support Fixture

    1. Refer to Figure.

    2. Install the upper manifold to the IAE 1M14084 Support fixture 1 off.

    3. Safety the cooling air duct to the IAE 1M14084 Support fixture with the swing bolt and the two screws. Make sure that the tube ends are in their holes.

    2. SUBTASK 75-24-49-440-052 Install the Lower Cooling Air Manifold to the Support Fixture

    1. Refer to Figure.

    2. Install the lower manifold to the IAE 1M14084 Support fixture 1 off.

    3. Safety the cooling air duct to the IAE 1M14084 Support fixture with the swing bolt and the two screws. Make sure that the tube ends are in their holes.

    3. SUBTASK 75-24-49-550-051 Put the Cooling Air Manifolds in to Storage

    1. Put the upper and lower cooling air manifolds and their IAE 1M14084 Support fixture in to storage.

    4. Figure: Install the Cooling Air Manifold to the Support Fixture

    Install the Cooling Air Manifold to the Support Fixture

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised tool nomenclature. (Editorial)

Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:0AM53
Tool Number:IAE 1M14084
Tool Name:IAE 1M14084 Support fixture