TASK 75-31-42-100-402 LPC Bleed Master Actuator - Related Parts - Clean The LPC Bleed Master Actuator Guide Assembly, Cleaning-002

DMC:V2500-A0-75-31-4200-01A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 75-31-42-100-402 LPC Bleed Master Actuator - Related Parts - Clean The LPC Bleed Master Actuator Guide Assembly, Cleaning-002

Effectivity

FIG/ITEM

PART NO.

01-250

5A9013

01-250

5A0334

General

This TASK gives the procedure to clean the guide assembly. For the other LPC bleed master acutuator parts, refer to Cleaning-000 TASK 75-31-42-100-400.

The practices and processes referred to in the procedure by the TASK/SUBTASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

NOTE

To identify the consumable materials refer to the PCI.

References

Refer to the SPM for data on these items.

Cleaning Policy and Materials, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 01-005 SOLVENT CLEANER72190CoMat 01-005

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 75-31-42-110-052 Chemically Clean the Bracket Assembly

      1. Remove the soft dirt and dust. Refer to SPM TASK 70-11-14-300-503.

      2. Do not immerse, use a soft bristle brush or swab.

      1. Dry

      2. Use clean dry air blast.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:72190
Enterprise Name:EXXON MOBIL CHEMICALS
BU Name:EXXON MOBIL CHEMICALS
P.O. Box:P.O. BOX 3272
City:HOUSTON
State:TX
Zip Code:77001
Country:USA
Phone Number:1-281-870-6000
Fax Number:1-281-870-6661
Internet:www.exxonmobil.com
Manufacturer Code:72190
Supply Number:CoMat 01-005
Type:sp01
Supply Short Name:CoMat 01-005 SOLVENT CLEANER
Supply Name:CoMat 01-005 SOLVENT CLEANER
Specification Groups:
Doc NumberType
JCR-065 (JAEC REF)EXXSOL D60
MTH 362 (MTU REF)EXXSOL D60
Suppliers:
ManufacturerRemarks
72190