TASK 75-31-43-100-403 LPC Bleed Slave Actuator - Related Parts - Clean The BSBVA Slave Guide Assembly, Cleaning-003

DMC:V2500-A0-75-31-4300-02A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 75-31-43-100-403 LPC Bleed Slave Actuator - Related Parts - Clean The BSBVA Slave Guide Assembly, Cleaning-003

Effectivity

FIG/ITEM

PART NO.

01-250

5A9017

01-250

5A0335

01-250

6A6437

01-250

6A6438

General

This TASK gives the procedure to clean the BSBVA slave guide assembly. For the other LPC bleed slave actuator parts, refer to Cleaning-000 TASK 75-31-43-100-400.

The practices and processes referred to in the procedure by the TASK/SUBTASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

References

Refer to the SPM for data on these items:

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Cleaning EquipmentLOCALCleaning Equipment

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 01-005 SOLVENT CLEANER72190CoMat 01-005

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 75-31-43-110-053 Clean the BSBVA Slave Guide Assembly

      1. Clean the part. Refer to SPM TASK 70-11-14-300-503.

      1. Do not put fully into the CoMat 01-005 SOLVENT CLEANER. Use a soft bristle brush or swab.

      2. Dry

      1. Use clean dry air blast.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:72190
Enterprise Name:EXXON MOBIL CHEMICALS
BU Name:EXXON MOBIL CHEMICALS
P.O. Box:P.O. BOX 3272
City:HOUSTON
State:TX
Zip Code:77001
Country:USA
Phone Number:1-281-870-6000
Fax Number:1-281-870-6661
Internet:www.exxonmobil.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:72190
Supply Number:CoMat 01-005
Type:sp01
Supply Short Name:CoMat 01-005 SOLVENT CLEANER
Supply Name:CoMat 01-005 SOLVENT CLEANER
Specification Groups:
Doc NumberType
JCR-065 (JAEC REF)EXXSOL D60
MTH 362 (MTU REF)EXXSOL D60
Suppliers:
ManufacturerRemarks
72190
Manufacturer Code:LOCAL
Tool Number:Cleaning Equipment
Tool Name:Cleaning Equipment