TASK 77-21-15-500-401 EGT Thermocouple - Related Parts - Store The EGT Thermocouple, Storage-001

DMC:V2500-A0-77-21-1500-00A-810A-C|Issue No:003.00|Issue Date:2018-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 77-21-15-500-401 EGT Thermocouple - Related Parts - Store The EGT Thermocouple, Storage-001

General

This thermocouple can be stored for long periods of time if the temperature and the humidity are controlled. Do not let the thermocouple be open to very high or low temperatures and humidity conditions. Store the thermocouple between minus 4 and plus 122 deg F (minus 20 and plus 50 deg C) and the humidity does not exceed 50 percent.

The storage limiting period of the thermocouple is 5 years. At the expiry of this period the thermocouple must be checked and tested, refer to TASK 77-21-15-700-401 (Testing-001).

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-055 BRUSH, PLATER`S TAMPICOLOCALCoMat 02-055
CoMat 12-004 P.V.C. SHEETLOCALCoMat 12-004
CoMat 12-022 DESICCANT SELF INDICATINGLOCALCoMat 12-022

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 77-21-15-550-051 Prepare the Thermocouple for Storage

    2. Put the EGT thermocouple and the CoMat 12-022 DESICCANT SELF INDICATING into a container made of CoMat 12-004 P.V.C. SHEET.

    3. Seal the container with the CoMat 02-055 BRUSH, PLATER`S TAMPICO.

      1. Attach a label to the container which has the data that follows:

      2. The part no.

      3. The storage data.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the procedure to add additional testing procedure for the EGT thermocouple. (17VC443)

Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:0AM53
Supply Number:CoMat 02-055
Type:sp01
Supply Short Name:CoMat 02-055 BRUSH, PLATER`S TAMPICO
Supply Name:CoMat 02-055 BRUSH, PLATER`S TAMPICO
Suppliers:
ManufacturerRemarks
0AM53
Manufacturer Code:C4689
Supply Number:CoMat 12-004
Type:sp01
Supply Short Name:CoMat 12-004 P.V.C. SHEET
Supply Name:CoMat 12-004 P.V.C. SHEET
Specification Groups:
Doc NumberType
RENOLIT 5102411 or RENOLIT SKY MATT
Suppliers:
ManufacturerRemarks
C4689
V572V
Manufacturer Code:K6835
Supply Number:CoMat 12-022
Type:sp01
Supply Short Name:CoMat 12-022 DESICCANT SELF INDICATING
Supply Name:CoMat 12-022 DESICCANT SELF INDICATING
Specification Groups:
Doc NumberType
SILICA GEL B.S.3523 COBALT CHLORIDE TYPE
Suppliers:
ManufacturerRemarks
K6835
22627
LOCAL
K8888
KD685