TASK 79-11-41-300-006 Oil Tank - Related Parts - Repair The Surface Protection Of The Oil Tank Assembly, Repair-006 (VRS5225)

DMC:V2500-A0-79-11-4100-05A-649A-C|Issue No:002.00|Issue Date:2017-02-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 79-11-41-300-006 Oil Tank - Related Parts - Repair The Surface Protection Of The Oil Tank Assembly, Repair-006 (VRS5225)

Effectivity

FIG/ITEM

PART NO.

01-860

4B7030

01-860

4B7195

01-860

4B7244

Material of component

DESCRIPTION

RR SYMBOL

MATERIAL

Oil tank

A357 T61 (AMS 4219)

General

Price and availability - none.

The practices and processes referred to in the procedure by the TASK/SUBTASK numbers are in the SPM.

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-008 PUMICE POWDERLOCALCoMat 02-008

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 79-11-41-110-055 Clean the Damaged Area

      1. Clean the damaged area.

      1. Refer to SPM TASK 70-38-02-300-503, SUBTASK 70-38-02-300-002.

    2. Clean the damaged area with cold water.

      3. Dry the damaged area.

      1. Use a dry air blast.

    2. SUBTASK 79-11-41-330-055 Remove the Damaged Surface Protection

      1. Remove the damaged surface protection.

    3. SUBTASK 79-11-41-110-056 Clean the Repair Area

    1. Clean the repair area with cold water.

      2. Dry the repair area.

      1. Use a dry air blast.

    4. SUBTASK 79-11-41-330-056 Apply the Surface Protection

      1. Apply the surface protection.

      1. Refer to SPM TASK 70-38-02-300-503.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the procedure to remove CoMat 02-139. (16VC386)

Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:41753
Supply Number:CoMat 02-008
Type:sp01
Supply Short Name:CoMat 02-008 PUMICE POWDER
Supply Name:CoMat 02-008 PUMICE POWDER
Specification Groups:
Doc NumberType
JCR-117200 GRADE
SS-P-821GDFFF PMC 3001200 GRADE
OMAT: 201200 GRADE
Suppliers:
ManufacturerRemarks
41753
LOCAL
K6835
V557V