DMC:V2500-A0-79-21-4900-08A-251A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 79-21-49-100-104 Engine Pressure Oil Tubes - Clean, Cleaning-004
Effectivity
FIG/ITEM | PART NO. |
10-100 | 5R8132 |
10-100 | 6A5394 |
11-100 | 5R8133 |
11-100 | 6A5395 |
12-100 | 5R8135 |
12-100 | 6A5397 |
13-100 | 5R8134 |
13-100 | 6A5396 |
13-100 | 6A6202 |
General
This TASK gives the procedure to clean the pressure oil tube assembly. For the other pressure oil tube parts, refer to Cleaning-000 TASK 79-21-49-100-100.
The practices and processes referred to in the procedure by the TASK number are in the SPM.
NOTE
To identify the consumable material refer to PCI.
References
Refer to the SPM for data on these items.
Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-005 SOLVENT CLEANER | 72190 | CoMat 01-005 |
Spares
NONESafety Requirements
NONEProcedure
Clean. Refer to SPM TASK 70-11-14-300-503.
Use clean dry air blast.
Dry
SUBTASK 79-21-49-110-058 Clean the Oil Tube Assembly