TASK 79-22-48-100-101 Gearbox Scavenge Oil Tubes - Clean The Scavenge Oil Tubes, Cleaning-001

DMC:V2500-A0-79-22-4800-01A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 79-22-48-100-101 Gearbox Scavenge Oil Tubes - Clean The Scavenge Oil Tubes, Cleaning-001

Effectivity

FIG./ITEM

PART NO.

01-110

4B0215

01-110

4B0306

01-110

4B0323

02-110

4B0216

02-110

4B0307

03-100

4B0309

03-100

4B7248

04-100

4B7200

04-100

4B7263

05-500

4B0308

05-500

4B0324

05-500

4B2262

05-500

4B7128

General

This TASK gives the procedure to clean the oil tubes.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

Reference

Refer to SPM TASK 70-10-00-100-501 Cleaning - General Information.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 79-22-48-110-053 Remove the Grease and the Oil

      1. Clean. Refer to SPM TASK 70-11-03-300-503.

      2. Mild clean

Requirements After Job Completion

Follow-On Conditions

NONE