STATEMENT OF FAA ACCEPTANCE CONDITIONS

DMC:V2500-A5-00-00-00-00A-023A-D|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Description

  1. STATEMENT OF FAA ACCEPTANCE CONDITIONS

  2. The content of this Catalog, with the exception of those ATA CHAPTER/SECTION/SUBJECT Numbers listed under Para 2, apply to those components of the V2500 Engine/Thrust Reverser, Common Nozzle Assembly and Tail Plug Assembly, that reside within the configuration definitions granted a TYPE CERTIFICATE or SUPPLEMENTAL TYPE CERTIFICATE by the FAA.

    NOTE

    Revisions to this catalog, which affect the data not covered within the ATA CHAPTER/SECTION/SUBJECT Numbers listed under Para 2. are released to meet the requirements of Federal Aviation Regulations No. FAR 33, Appendix A, and are regarded as being FAA approved upon issuance.
  3. The following ATA CHAPTER/SECTION/SUBJECT Numbers contain basic or revised data that are not subject to FAA Approval.

    ATA CHAPTER SECTION SUBJECT No.

    SUBJECT IDENTIFICATION

    23-44-41

    MAINTENANCE INTERPHONE JACK

    24-21-41

    IDG QAD COUPLING

    24-21-43

    IDG CABLES

    24-21-51

    INTEGRATED DRIVE GENERATOR IDG

    26-12-15

    ACCESSORY ZONE FIRE DETECTOR

    26-12-17

    CORE ZONE FIRE DETECTOR

    26-12-19

    CORE OVERHEAT DETECTOR

    29-11-17

    HYDRAULIC PRESSURE SWITCH

    29-11-43

    HYDRAULIC FILTER CASE DRAIN

    29-11-49

    HYDRAULIC TUBES

    29-11-51

    ENGINE PUMP

    30-29-49

    ANTI-ICE DUCTS

    30-21-51

    ENGINE AIR INTAKE ANTI-ICE VALVE

    36-11-41

    BLEED AIR DUCTS

    36-11-51

    HP BLEED VALVE

    36-11-52

    BLEED VALVE PRESSURE REGULATOR

    36-21-49

    PRESSURE INDICATING TUBES

    71-00-20

    DEMOUNTABLE POWER PLANT

    71-00-21

    THRUST REVERSER HOLD OPEN ROD SUPPORT

    71-00-22

    THRUST REVERSER LOAD SHARE PINS

    71-00-23

    FORWARD LATCH OPEN INDICATOR

    71-00-24

    FAN COWL SUPPORT ROD BRACKETS

    71-11-11

    AIR INTAKE COWL

    71-11-43

    AIR INTAKE COWL HARNESS

    71-13-11

    LEFT FAN COWL

    71-13-12

    FAN COWL DOOR HOLD OPEN ROD

    71-13-13

    FAN COWL SUPPORT LATCHES

    71-13-14

    LEFT FAN COWL ACCESS PANELS

    71-13-15

    LEFT FAN COWL HINGES

    71-13-16

    RIGHT FAN COWL

    71-13-17

    RIGHT FAN COWL ACCESS PANELS

    71-13-18

    RIGHT FAN COWL HINGES

    71-21-12

    FORWARD MOUNT ASSEMBLY

    71-52-41

    FIRE DETECTION SYSTEM A, CABIN SERVICES AND NACELLE TEMPERATURE HARNESS

    71-52-42

    FIRE DETECTION SYSTEM B, HARNESS

    71-71-42

    DRAINS MAST

    71-71-48

    FUEL DRAIN TUBES - POWER PLANT

    71-73-48

    POWER PLANT OIL, HYDRAULIC AND WATER DRAIN TUBES

    72-61-49

    GEARBOX BREATHER OUTLET DUCT

    73-11-48

    FLEXIBLE FUEL TUBES - POWER PLANT

    73-22-48

    P2/T2 AIR TUBES

    75-22-48

    ACAC EXHAUST DUCT

    75-28-48

    EEC COOLING FLEXIBLE HOSES

    75-28-49

    EEC COOLING DUCTS

    80-13-41

    PNEUMATIC STARTER

    80-13-49

    STARTER DUCT

    80-13-51

    PNEUMATIC STARTER VALVE