Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-00-300-009 HPC Assembly Replacement - Project Visit Maintenance, Repair-009 (VRS3841)
General
This procedure outlines the minimum requirements to remove an HPC Assembly, inspect all engine hardware to extent exposed, and re-assemble a new or refurbished HPC Assembly.
It is not intended to be utilized for normal shop visits for the purpose of scheduled engine/module overhaul or refurbishment where a full on-wing interval is expected. This procedure alone does not permit any module/assembly, other than HPC Assembly, to be zero-timed (time since LEVEL 3 maintenance).
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
The proprietary nature of this repair requires that any facility not authorized to accomplish this repair contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility. Contact the following, and refer to the latest approved revision of EA17VC515.
IAE International Aero Engines AG
400 Main Street
M/S 121-10
East Hartford, CT 06118
U.S.A.
Email: gpiaecomms@iaev2500.com
Attn: Manager Technical Services