Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
V2500-A5
Common Information
TASK 72-45-14-840-002 HPT Stage 1 Blade - Rework The Blades, Rework-002 - SBE 72-0242
Effectivity
FIG/ITEM | PART NO. |
|---|---|
01-010 | 2A8521 |
01-010 | 2A8521-002 |
01-010 | 2A8521-004 |
01-010 | 2A8701 |
01-010 | 2A8701-001 |
01-010 | 2A8701-002 |
General
The practices and processes referred to in the procedure by the TASK number are in the SPM
Refer to the indicated Service Bulletin for specific application requirements
Repair Facilities
The source demonstration requirements of the rework means that any facility not authorized to accomplish this rework either utilize the Authorized Rework Vendors listed below or contact the IAE Repair Development Group to determine if a qualification program can be initiated at their facility.
IAE International Aero Engines AG
400 Main Street M/S 121-10
East Hartford, CT 06108
USA
ATTN: Manager Maintenance Operations
Authorized rework vendors for this bulletin are listed below:
None at this time
The designation by IAE of an authorized rework vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the rework. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the vendors to carry out the rework, and accepts no responsibility whatsoever for any work that may be carried out by a vendor, other then when IAE is listed as the vendor. Authorized rework vendors do not act as agents or representatives of IAE.