TASK 72-45-23-300-023 HPT Stage 1 Duct Segment - Remove And Replace The Ceramic Abradable Coating, Repair-023 (VRS3780)

DMC:V2500-A5-72-45-2301-00A-609A-C|Issue No:002.00|Issue Date:2014-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

V2500-A5

Common Information

TASK 72-45-23-300-023 HPT Stage 1 Duct Segment - Remove And Replace The Ceramic Abradable Coating, Repair-023 (VRS3780)

Effectivity

FIG/ITEM

PART NO.

01-060

2A4169

01-060

2A4359

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT duct segment

Contact approved source

General

Repair Facilities

The Source Demonstration requirements of this repair means that any facility not authorized to accomplish this repair either, utilize the Authorized Repair Vendors listed below, or contact the IAE Repair Services Group to determine if a qualification program can be initiated at their facility.

IAE - International Aero Engines AG
400 Main Street, MailStop 121-10
East Hartford, CT 06118
USA
Email: gpiaecomms@iaev2500.com
ATTN: Manager, Maintenance Operations

Authorized Repair Vendor for Repair VRS3780 are listed below:

None

The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work, and accepts no responsibility whatsoever on any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Added new part number and modified authorized repair vendor. (08VC291B)