Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
V2500-A5
Common Information
TASK 72-45-32-300-021 HPT Stage 2 Blade - Strip And Apply Protective Coating On Airfoil And Platform, Repair-021 (VRS3602)
Material of component
PART IDENT | SYMBOL | MATERIAL |
|---|---|---|
Stage 2 HPT blade assembly | Wrought non-hardening nickel base alloy |
General
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
The proprietary nature of this repair requires that any facility not authorized to accomplish this repair either utilize the Authorized Repair Vendors listed below or contact the IAE Repair and Development Group to determine if a qualification program can be initiated at their facility.
IAE - International Aero Engines AG
400 Main Street, Mail Stop 121-10
East Hartford, CT 06118
USA
Email: gpiaecomms@iaev2500.com
ATTN: Manager, Maintenance Operations
Authorized repair vendors for Repair VRS3602 are listed below:
Dallas Airfoil Repair Operations
Pratt and Whitney Services, Inc.
1177 Great Southwest Pkwy.
Grand Prairie, TX 75050
USA
Mailstop: 970-00
Tel: 972-343-2026
Fax: 972-343-1301
Turbine Overhaul Services Pte, Ltd. (TOS)
5 Tuas Drive Two - Mail Stop 107-58
Singapore 638639
Tel: 65-6860-2260
Fax: 65-6862-1068
The designation by IAE of an authorized vendor indicates that the repair vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.
Repair Facilities