TASK 70-11-05-100-501 Make-Up Of The Solutions To Remove Paint From Parts (Inorganic Procedure)

DMC:V2500-00-70-11-05-00A-081A-D|Issue No:004.00|Issue Date:2018-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-11-05-100-501 Make-Up Of The Solutions To Remove Paint From Parts (Inorganic Procedure)

Consumable Materials

Refer to SPM TASK 70-11-48-110-501 for consumable materials.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICALLY/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

  1. SUBTASK 70-11-05-100-001 Make-up and Control of Caustic Soda Solution - Deleted

  2. SUBTASK 70-11-05-100-002 - Deleted

  3. SUBTASK 70-11-05-100-003 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 7) - Deleted

  4. SUBTASK 70-11-05-100-004 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 17) - Deleted

    5. SUBTASK 70-11-05-100-005 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 20)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-020 for the make-up of Solution Code 20 alkaline rust remover solution.

    6. SUBTASK 70-11-05-100-006 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 23)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-023 for the make-up of Solution Code 23 alkaline rust remover solution.

    7. SUBTASK 70-11-05-100-007 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 24)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-024 for the make-up of Solution Code 24 alkaline rust remover solution.

    8. SUBTASK 70-11-05-100-008 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 97)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-048 for the make-up of Solution Code 97 alkaline rust remover solution.

  9. SUBTASK 70-11-05-100-009 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 112) - Deleted

    10. SUBTASK 70-11-05-100-010 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 175)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-097 for the make-up of Solution Code 175 alkaline rust remover solution.

    11. SUBTASK 70-11-05-100-011 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 25)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-025 for the make-up of Solution Code 25 alkaline rust remover solution.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the task in its entirety. (18VC181)