TASK 70-11-13-100-501 Make-Up Of The Solutions in The One-step Alkaline Rust Remover Procedure To Clean The Components (Long Soak For Cobalt And Nickel Base Alloys And Heat And Non Corrosion Resistant Materials Steels)

DMC:V2500-00-70-11-13-00A-081A-D|Issue No:003.00|Issue Date:2018-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-11-13-100-501 Make-Up Of The Solutions in The One-step Alkaline Rust Remover Procedure To Clean The Components (Long Soak For Cobalt And Nickel Base Alloys And Heat And Non Corrosion Resistant Materials Steels)

Table 1.

Make-up and Set-up of the Alkaline Rust Remover Solutions:-

(Solution Code 20)

(Solution Code 23)

(Solution Code 24)

(Solution Code 25)

(Solution Code 97)

Consumable Materials

Refer to SPM TASK 70-11-48-110-501 for consumable materials.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION. THESE CONTAIN INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

  1. SUBTASK 70-11-13-100-001-A01 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 5) - Deleted

  2. SUBTASK 70-11-13-100-001-A02 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 6) - Deleted

  3. SUBTASK 70-11-13-100-001-A03 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 7) - Deleted

  4. SUBTASK 70-11-13-100-001-A04 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 11) - Deleted

  5. SUBTASK 70-11-13-100-001-A05 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 15) - Deleted

  6. SUBTASK 70-11-13-100-001-A06 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 16) - Deleted

  7. SUBTASK 70-11-13-100-001-A07 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 17) - Deleted

  8. SUBTASK 70-11-13-100-001-A08 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 19)- Deleted

    9. SUBTASK 70-11-13-100-001-A09 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 20)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-020 for the make-up of Solution Code 20 alkaline rust remover solution.

    10. SUBTASK 70-11-13-100-001-A10 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 23)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-023 for the make-up of Solution Code 23 alkaline rust remover solution.

    11. SUBTASK 70-11-13-100-001-A11 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 24)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-024 for the make-up of Solution Code 24 alkaline rust remover solution.

    12. SUBTASK 70-11-13-100-001-A12 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 25)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-025 for the make-up of Solution Code 24 alkaline rust remover solution.

  13. SUBTASK 70-11-13-100-001-A13 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 72) - Deleted

  14. SUBTASK 70-11-13-100-001-A14 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 112) - Deleted

    15. SUBTASK 70-11-13-100-001-A15 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 97)

    1. Refer to SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-048 for the make-up of solution code 97 alkaline rust remover solution.

  16. SUBTASK 70-11-13-100-001-A16 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 98) - Deleted

  17. SUBTASK 70-11-13-100-001-A17 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 99) - Deleted

  18. SUBTASK 70-11-13-100-001-A18 Make-up and Set-up of the Alkaline Rust Remover Solution (Solution Code 139) - Deleted

  19. SUBTASK 70-11-13-100-002 Make-up and Set-up of the Corrosion Inhibitor Solution (Solution Code 80) - Deleted

  20. SUBTASK 70-11-13-100-002-A01 Make-up and Set-up of the Corrosion Preventives - Deleted

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised the task in its entirety. (18VC181)