DMC:V2500-00-70-11-18-00A-081A-DIssue No:002.00Issue Date:2015-05-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-11-18-100-501 Make-Up Of The Solution To Clean Carbon Seals
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 10-008 DEWATERING OIL (HOT) | LOCAL | CoMat 10-008 | ||
| CoMat 10-009 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-009 | ||
| CoMat 10-010 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-010 | ||
| CoMat 10-011 DEWATERING FLUID (COLD) | K6835 | CoMat 10-011 | ||
| CoMat 10-012 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-012 | ||
| CoMat 10-013 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-013 | ||
| CoMat 10-077 APPROVED ENGINE OILS | LOCAL | CoMat 10-077 | ||
| CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER | 0AM53 | CoMat 12-015 | ||
| CoMat 12-016 CORROSION PREVENTIVE THIN FILM | 2H517 | CoMat 12-016 | ||
| CoMat 12-027C CORROSION PREVENTIVE COMPOUND | LOCAL | CoMat 12-027C |
Spares
NONESafety Requirements
WARNING
IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.
Procedure
Use CoMat 10-077 APPROVED ENGINE OILS at 100 percent by volume.
SUBTASK 70-11-18-100-001 Make-up and Set-up of the Engine Oil
Refer to the SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-035 for the make-up of Solution Code 80 corrosion inhibitor solution.
SUBTASK 70-11-18-100-002 Make-up and Set-up of the Corrosion Inhibitor Solution (Solution Code 80)
NOTE
This is a temporary water soluble rust inhibitor; use on parts for a maximum of one week.Use the corrosion preventives (that is, the rust inhibitors and dewatering agents) that follow, at 100 percent by volume: CoMat 10-008 DEWATERING OIL (HOT), CoMat 10-009 DEWATERING FLUID (COLD), CoMat 10-010 DEWATERING FLUID (COLD), CoMat 10-011 DEWATERING FLUID (COLD), CoMat 10-012 DEWATERING FLUID (COLD), CoMat 10-013 DEWATERING FLUID (COLD), CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER, CoMat 12-016 CORROSION PREVENTIVE THIN FILM and CoMat 12-027C CORROSION PREVENTIVE COMPOUND.
SUBTASK 70-11-18-100-003 Make-up and Set-up of the Corrosion Preventives