DMC:V2500-00-70-11-18-00A-300A-DIssue No:001.00Issue Date:2013-03-20
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-11-18-200-502 The Test And Control Of The Solution To Clean Carbon Seals
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 10-077 APPROVED ENGINE OILS | LOCAL | CoMat 10-077 | ||
| CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER | 0AM53 | CoMat 12-015 | ||
| CoMat 12-016 CORROSION PREVENTIVE THIN FILM | 2H517 | CoMat 12-016 | ||
| CoMat 12-027C CORROSION PREVENTIVE COMPOUND | LOCAL | CoMat 12-027C | ||
| CoMat 10-008 DEWATERING OIL (HOT) | LOCAL | CoMat 10-008 | ||
| CoMat 10-009 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-009 | ||
| CoMat 10-010 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-010 | ||
| CoMat 10-011 DEWATERING FLUID (COLD) | K6835 | CoMat 10-011 | ||
| CoMat 10-012 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-012 | ||
| CoMat 10-013 DEWATERING FLUID (COLD) | LOCAL | CoMat 10-013 |
Spares
NONESafety Requirements
WARNING
IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.
Procedure
You must change the CoMat 10-077 APPROVED ENGINE OILS when it will not clean the carbon seals satisfactorily.
SUBTASK 70-11-18-200-001 The Test of the Engine Oil
Refer to the controls and tests for cleaning consumables (SUBTASK 70-11-49-180-008) in the SPM TASK 70-11-49-110-501 for the control and test of CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER, CoMat 12-016 CORROSION PREVENTIVE THIN FILM and CoMat 12-027C CORROSION PREVENTIVE COMPOUND.
SUBTASK 70-11-18-200-003 The Control and Test of the Corrosion Preventives