DMC:V2500-00-70-11-53-01A-081A-DIssue No:001.00Issue Date:2015-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-11-53-100-501 Make-Up Of Aqueous Carbon Remover
Introduction
This task specifies the make-up of solution used to remove carbon by aqueous-based carbon remover. Refer to the SPM TASK 70-11-48-110-501 for the make-ups of the subsequent cleaning solutions.
NOTE
To identify the consumable material, refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Mild-steel tank | LOCAL | Mild-steel tank |
Consumables, Materials and Expendables
NONESpares
NONESafety Requirements
WARNING
IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS. THESE CONTAIN INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.
WARNING
REFER TO THE SPM TASK 70-11-48-110-501 FOR SPECIFIC PRECAUTIONS.
Procedure
Refer to the SPM TASK 70-11-48-110-501, SUBTASK 70-11-48-110-101.
SUBTASK 70-11-53-100-001 Make-Up and Set-Up of the Aqueous Carbon Remover (Solution Code 191)