TASK 70-12-11-200-502 Control Of The Solutions Used To Dry Abrasive 500 Grit Blast (Pressure-Type Machine or Suction-Type Machine)

DMC:V2500-00-70-12-11-00A-300A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-12-11-200-502 Control Of The Solutions Used To Dry Abrasive 500 Grit Blast (Pressure-Type Machine or Suction-Type Machine)

NOTE

To identify the consumable materials, refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER0AM53CoMat 12-015
CoMat 12-016 CORROSION PREVENTIVE THIN FILM2H517CoMat 12-016
CoMat 12-027C CORROSION PREVENTIVE COMPOUNDLOCALCoMat 12-027C

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURERS MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

    1. SUBTASK 70-12-11-200-001 Control of the Corrosion Preventives

    1. To control CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER refer to the SPM TASK 70-11-49-110-501, SUBTASK 70-11-49-180-008.

    2. To control CoMat 12-016 CORROSION PREVENTIVE THIN FILM refer to the SPM TASK 70-11-49-110-501, SUBTASK 70-11-49-180-008.

    3. To control CoMat 12-027C CORROSION PREVENTIVE COMPOUND, refer to the SPM TASK 70-11-49-110-501, SUBTASK 70-11-49-180-008.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:2H517
Enterprise Name:DELETED. SEE CAGE CODE 2R128
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X111X
Supply Number:CoMat 12-015
Type:sp01
Supply Short Name:CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER
Supply Name:CoMat 12-015 CORROSION PREVENTIVE, FINGERPRINT REMOVER
Specification Groups:
Doc NumberType
DELETED. USE COMAT 10-017.
Suppliers:
ManufacturerRemarks
X111X
Manufacturer Code:X111X
Supply Number:CoMat 12-016
Type:sp01
Supply Short Name:CoMat 12-016 CORROSION PREVENTIVE THIN FILM
Supply Name:CoMat 12-016 CORROSION PREVENTIVE THIN FILM
Specification Groups:
Doc NumberType
DELETED. USE COMAT 10‐017.
Suppliers:
ManufacturerRemarks
X111X
Manufacturer Code:X111X
Supply Number:CoMat 12-027C
Type:sp01
Supply Short Name:CoMat 12-027C CORROSION PREVENTIVE COMPOUND
Supply Name:CoMat 12-027C CORROSION PREVENTIVE COMPOUND
Specification Groups:
Doc NumberType
DELETED. USE COMAT 10‐149.
Suppliers:
ManufacturerRemarks
X111X