TASK 70-32-03-320-501 Finishing By Electrochemical Or Electrodischarge Metal Removal

DMC:V2500-00-70-32-03-00A-653A-D|Issue No:001.00|Issue Date:2013-03-20

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-32-03-320-501 Finishing By Electrochemical Or Electrodischarge Metal Removal

This Task has been deleted and replaced by the SPM TASK 70-35-23-320-501; links to replacement sections and subtasks are given below.

Safety Precautions

This paragraph is deleted. It has been replaced by SUBTASK 70-35-23-860-001.

General

This paragraph is deleted. It has been replaced by SUBTASK 70-35-23-860-002.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 70-32-03-320-001 Application of ECMR and EDMR

    1. This subtask is deleted. It has been replaced by SUBTASK 70-35-23-860-003.

    2. SUBTASK 70-32-03-320-002 Metallurgical Sample Preparation

    1. This subtask is deleted. It has been replaced by SUBTASK 70-35-23-860-006.

    3. SUBTASK 70-32-03-320-003 Quality Standards

    1. This subtask is deleted. It has been replaced by SUBTASK 70-35-23-290-001 for EDMR, and SUBTASK 70-35-23-290-002 for ECMR.

    2. The illustrations to this task have been replaced by illustrations in the SPM TASK 70-35-23-320-501.

Requirements After Job Completion

Follow-On Conditions

NONE