TASK 70-33-02-200-502 The Test And Control Of The Solutions Used In The Procedure To Apply Chromium Plate On Stainless Steel, Nickel And Cobalt Base Alloys

DMC:V2500-00-70-33-02-00A-300A-D|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-33-02-200-502 The Test And Control Of The Solutions Used In The Procedure To Apply Chromium Plate On Stainless Steel, Nickel And Cobalt Base Alloys

General

Refer to the Solution Index in the SPM TASK 70-11-47-110-501, SUBTASK 70-11-47-180-005 for the test properties, minimum frequencies and P-Tests for each of the Solution Codes used.

NOTE

Refer to the SPM TASK 70-11-47-110-501 for more safety precautions.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

WARNING

IT IS THE RESPONSIBILITY OF THE OPERATOR TO OBTAIN AND OBSERVE THE MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIALS. THESE CONTAIN INFORMATION SUCH AS, HAZARDOUS INGREDIENTS, PHYSICAL/CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, USE AND CONTROL MEASURES AND ALSO TO TAKE LOCAL REGULATIONS INTO CONSIDERATION.

Procedure

    1. SUBTASK 70-33-02-200-001 The Test and Control of the Heavy Duty Alkali Cleaner Solution (Solution Code 39)

    1. Refer to the P-6 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-015 for the test and control of Solution Code 39.

    2. SUBTASK 70-33-02-200-002 The Test and Control of the Chromium Strip Solution (Solution Code 41)

    1. Refer to the P-6 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-015 for the test and control of Solution Code 41.

    3. SUBTASK 70-33-02-200-003 The Test and Control of the Alkali Cleaner Solution (Medium Duty) (Solution Code 47)

    1. Refer to the P-6 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-015 for the test and control of Solution Code 47.

    4. SUBTASK 70-33-02-200-004 The Test and Control of the 100 Percent Inhibited Hydrochloric Acid Solution (Solution Code 69)(Deleted)

    1. Solution Code 69 is superseded by Solution Code 70 (Step).

    5. SUBTASK 70-33-02-200-005 The Test and Control of the Inhibited Hydrochloric Acid Solution (Solution Code 70)

    1. There is no P-Test for Solution Code 70.

    6. SUBTASK 70-33-02-200-006 The Test and Control of the 50 Percent Inhibited Acid Solution (Solution Code 71)

    1. This subtask is deleted.

    7. SUBTASK 70-33-02-200-007 The Test and Control of the Alkali Smut Removal Solution (Solution Code 48)

    1. Refer to the P-36 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-180-024 for the test and control of Solution Code 48.

    8. SUBTASK 70-33-02-200-008 The Test and Control of the Alkali Cleaner Solution (Heavy Duty, Phosphate-Free) (Solution Code 58)

    1. Refer to the P-6 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-015 for the test and control of Solution Code 58.

    9. SUBTASK 70-33-02-200-009 The Test and Control of the 65 Percent Hydrochloric Acid Solution (Solution Code 36)

    1. Refer to the P-1 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-013 for the test and control of Solution Code 36.

    10. SUBTASK 70-33-02-200-010 The Test and Control of the 40 Percent Sulfuric Acid Solution (Solution Code 31)

    1. Refer to the P-1 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-013 for the test and control of Solution Code 31.

    11. SUBTASK 70-33-02-200-011 The Test and Control of the Sulfuric-Hydrofluoric Acid Solution (Solution Code 37)

    1. Refer to the P-1 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-013 for the test and control of Solution Code 37.

    12. SUBTASK 70-33-02-200-012 The Test and Control of the Acid Salt Solution (Solution Code 46)

    1. Refer to the P-79 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-029 for the test and control of Solution Code 46.

    13. SUBTASK 70-33-02-200-013 The Test and Control of the Nitric-Hydrofluoric Acid Solution (Solution Code 33)

    1. Refer to the P-33 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-023 for the test and control of Solution Code 33.

    14. SUBTASK 70-33-02-200-014 The Test and Control of the Titanium Etching Solution (Solution Code 32)

    1. Refer to the P-33 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-023 for the test and control of Solution Code 32.

    15. SUBTASK 70-33-02-200-015 The Test and Control of the Descaling Solution (Solution Code 50)

    1. Refer to the P-33 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-023 for the test and control of Solution Code 50.

    16. SUBTASK 70-33-02-200-016 The Test and Control of the Chromium Plating Solution (Solution Code 40)

    1. Refer to the P-22 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-021 for the test and control of Solution Code 40.

    17. SUBTASK 70-33-02-200-017 The Test and Control of the Chromic Acid Solution (Solution Code 88)

    1. Refer to the P-22 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-021 for the test and control of Solution Code 88.

    18. SUBTASK 70-33-02-200-018 The Test and Control of the Chromium Plating Solution (Solution Code 42)

    1. Refer to the P-22 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-021 for the test and control of Solution Code 42.

    19. SUBTASK 70-33-02-200-019 The Test and Control of the Self-Regulating Chromium Plating Solution (Solution Code 43)

    1. Refer to the P-22 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-021 for the test and control of Solution Code 43.

    20. SUBTASK 70-33-02-200-020 The Test and Control of the High Speed Chromium Plating Solution (Solution Code 89)

    1. Refer to the manufacturer's instructions for the test and control of Solution Code 89.

    21. SUBTASK 70-33-021-200-024 The Test and Control of the Chromium Strip Solution (Solution Code 135)

    1. There is no P Test for Solution Code 135.

    2. Throw away the solution when the stripping time becomes too long.

  22. SUBTASK 70-33-02-200-025 Deleted

    23. SUBTASK 70-33-02-200-026 The Test and Control of the Electrolytic Cleaner (Heavy Duty), Phosphate-Free and Cyanide-Free Solution (Solution Code 137)

    1. Refer to the P-6 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-015 for the test and control of Solution Code 137.

    24. SUBTASK 70-33-02-200-027 The Test and Control of the Chromium Plating Solution (Solution Code 138)

    1. Refer to the P-22 Test Method in the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-021 for the test and control of Solution Code 138.

    25. SUBTASK 70-33-02-200-028 The Test and Control of the Electrolytic Cleaner Solution (Non-cyanide) (Solution Code 169)

    1. There is no P-Test for Solution Code 169.

    26. SUBTASK 70-33-02-200-029 The Test and Control of the Electrolytic Cleaner Solution (Non-cyanide) (Solution Code 165)

    1. There is no P-Test for Solution Code 165.

    27. SUBTASK 70-33-02-200-030 The Test and Control of the Electrolytic Cleaner Solution (Cyanide-Type, Phosphate-Free) (Solution Code 154)

    1. Refer to the SPM TASK 70-11-47-110-501 SUBTASK 70-11-47-180-035 for the test and control of Solution Code 154 by the manufacturer's instructions.

    28. SUBTASK 70-33-02-200-031 The Test and Control of the Alkali Smut Removal Solution (Solution Code 156)

    1. There is no P-Test for Solution Code 156.

Requirements After Job Completion

Follow-On Conditions

NONE