TASK 71-21-11-100-003 Thrust Mount Brackets - Clean, Cleaning-003

DMC:V2500-A0-71-21-1103-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 71-21-11-100-003 Thrust Mount Brackets - Clean, Cleaning-003

Effectivity

FIG/ITEM

PART NO.

01-500

5A0390

01-500

5A8695

01-500

5A1422

01-500

5A1431

01-700

5A8696

01-700

5A0391

01-700

5A1423

01-700

5A1432

General

This TASK gives the procedure to clean the thrust mount bracket assembly. For the other forward mount support parts, refer to TASK 71-21-11-100-000 (CLEANING-000).

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Refer to the SPM for data on these items.

Cleaning - General Information, SPM TASK 70-10-00-100-501

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Cleaning EquipmentLOCALCleaning Equipment

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 71-21-11-110-057 Remove the Soft Dirt and Dust

    1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-03-300-503

    2. SUBTASK 71-21-11-110-058 Remove the Dry Film Lubricant

    1. NOTE

      If dry film lubricant is present, do step again.

      Remove the dry film lubricant. Refer to the SPM TASK 70-11-06-300-503

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Tool Number:Cleaning Equipment
Tool Name:Cleaning Equipment