TASK 71-51-44-100-301 Ignition Supply Harness - Clean The Harness, Cleaning-001

DMC:V2500-A0-71-51-4400-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 71-51-44-100-301 Ignition Supply Harness - Clean The Harness, Cleaning-001

Effectivity

FIG/ITEM

PART NO

01-005

5A0279

01-005

6A4395

01-005

6A4716

01-005

6A5668

General

This TASK gives the procedure for the cleaning of the ignition supply harness. For other ignition supply harness parts refer to Cleaning-000 TASK 71-51-44-100-300 and the Component Maintenance Manual - Miscellaneous Mechanical Components Cleaning-000 TASK 71-51-44-100-400.

The practices and processes referred to in the procedure by the TASK/SUBTASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

References

Refer to the SPM for data on these items.

General Cleaning Information, SPM TASK 70-10-00-100-501.

General Instructions on Chemical Cleaning, SPM TASK 70-11-00-110-501.

Make-up of the Solutions to Mild Clean Components (All Metals), SPM TASK 70-11-03-100-501.

Test and Control of the Solutions to Mild Clean Components (All Metals), SPM TASK 70-11-03-200-502.

Procedure to Mild Clean Components (All Metals), SPM TASK 70-11-03-300-503.

The Procedure to Solvent Clean (All Metals), SPM TASK 70-11-26-300-503.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 71-51-44-110-051 Chemically Clean the Ignition Supply Harness

      1. WARNING

        DO NOT GET CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES. PUT ON PROTECTIVE CLOTHING, GOGGLES AND A FACE MASK. USE THE FLUID IN A WELL VENTILATED AREA. DO NOT BREATHE THE VAPOR. IF YOU GET THE CLEANING FLUID ON YOUR SKIN OR IN YOUR EYES, FLUSH IT AWAY WITH WATER. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.

        Clean the harness Solvent clean cable and its connectors

Requirements After Job Completion

Follow-On Conditions

NONE