TASK 71-52-45-100-301 Exhaust Gas Temperature (EGT) Wiring Harness - Clean The Harness, Cleaning-001 (PRE and POST SBE 77-0015)

DMC:V2500-A0-71-52-4500-00A-251A-C|Issue No:003.00|Issue Date:2019-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 71-52-45-100-301 Exhaust Gas Temperature (EGT) Wiring Harness - Clean The Harness, Cleaning-001 (PRE and POST SBE 77-0015)

Effectivity

FIG/ITEM

PART NO.

REMARKS

01-005

2A1490

PRE SBE 77-0015

01-005

2A4524

POST SBE 77-0015

01-005

6A4720

PRE SBE 77-0015

01-005

6A5878

PRE SBE 77-0015

General

This TASK gives the procedure for the cleaning of the EGT Wiring harness (PRE and POST SBE 77-0015).

The practices and processes referred to in the procedure by the TASK/SUBTASK numbers are in SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

The consumable materials are given in the related SPM TASK.

References

Refer to General Cleaning, SPM TASK 70-10-00-100-501 for important cleaning information that supplements the TASKs.

When more than one TASK or SUBTASK is specified for a part, refer to General Cleaning, SPM TASK 70-10-00-100-501 for selection of the applicable cleaning TASK or SUBTASK.

Refer to General Cleaning, SPM TASK 70-11-00-110-501 for the TASK number given below.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 71-52-45-110-051 Chemically Clean the EGT Harness

      1. Solvent clean. Refer to SPM TASK 70-11-57-110-501.

      1. Clean the contact points and wiring harness.

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Added pre service bulletin information. (Editorial)

Change Type:

Revised the effectivity table. (18VC112)