DMC:V2500-A0-72-00-5002-00A-649A-CIssue No:002.00Issue Date:2016-08-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-50-300-002 LPT Module - Front Lock Nut - Blend Repair, Repair-002 (VRS1116)
General
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 05-020 WATERPROOF SILICON CARBIDE | LOCAL | CoMat 05-020 | ||
| CoMat 05-021 WATERPROOF SILICON CARBIDE | 44197 | CoMat 05-021 |
Spares
NONESafety Requirements
NONEProcedure
Use abrasive stones or papers and/or fine file.
The surface finish of the repair must be same as the adjacent area, Figure.
Refer to the SPM TASK 70-35-03-300-501.
Scallop, make smooth and/or hand polish to remove burrs, nicks and/or scores.
SUBTASK 72-00-50-350-053 Remove the Damage from the Front Lock Nut
Visually examine the repaired area for nicks, scores and/or burrs using 10X magnifying glass.
Refer to TASK 72-00-50-200-000.
Visually examine the repaired area.
SUBTASK 72-00-50-220-130 Examine the Front Lock Nut
Figure: Front lock nut - repair limits
Front lock nut - repair limits
