TASK 72-00-50-100-004 LPT Module - Adjust Ring - Clean, Cleaning-004

DMC:V2500-A0-72-00-5003-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-50-100-004 LPT Module - Adjust Ring - Clean, Cleaning-004

Effectivity

FIG/ITEM

PART NO.

01-300

5A0371

01-300

5A0996

01-303

5A0344

01-303

5A0997

01-304

5A0345

01-304

5A0998

01-305

5A0346

01-305

5A0999

01-306

5A0414

01-306

5A1036

01-307

5A0415

01-307

5A1037

01-308

5A0416

01-308

5A1038

01-309

5A1839

01-315

5A1881

01-316

5A1882

01-317

5A1883

General

This TASK gives the procedure to clean the adjust ring. For the other LP turbine module parts, refer to TASK 72-00-50-100-000 (CLEANING-000).

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Refer to the SPM for data on these items.

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-00-50-110-056 Clean the Adjust Ring (01-300) to Remove the Soft Dirt and Dust

    1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-26-300-503

      2. Dry.

      1. Use clean dry air blast or CoMat 02-099 LINT-FREE CLOTH.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X