TASK 72-00-50-300-005 LPT Module - Manifold Brackets - Replace The Plate Nut, Repair-005 (VRS1052)

DMC:V2500-A0-72-00-5005-00A-920A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-50-300-005 LPT Module - Manifold Brackets - Replace The Plate Nut, Repair-005 (VRS1052)

Effectivity

FIG/ITEM

PART NO.

01-430

2A0292

Material of component

PART IDENT

SYMBOL

MATERIAL

Manifold bracket

General

NOTE

Other consumable materials are given in the SPM.
To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Rivet squeezerLOCALRivet squeezer
Sheet fastenerLOCALSheet fastener

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 05-020 WATERPROOF SILICON CARBIDELOCALCoMat 05-020
CoMat 05-021 WATERPROOF SILICON CARBIDE44197CoMat 05-021

Spares

NameManufacturerPart Number / IdentificationQuantityRemark
RivetMS20427M3-32
Plate nutMS21048-31

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-00-50-350-054 Remove the Plate Nut from the Manifold Bracket

    1. Refer to Figure.

    2. CAUTION

      DO NOT REMOVE PARENT MATERIAL FROM THE MANIFOLD BRACKET.

      Remove the two rivets that attach the plate nut to the manifold bracket.

    3. Remove the plate nuts from the manifold bracket.

    2. SUBTASK 72-00-50-350-055 Install the New Plate Nut to the Manifold Bracket

    1. Refer to Figure.

    2. Put a new plate on the manifold bracket.

      3. Install new rivets into the hole in the manifold bracket.

      1. Use a rivet squeezer and a sheet fastener.

    3. Figure: Replacement of the plate nut

    Replacement of the plate nut

Requirements After Job Completion

Follow-On Conditions

NONE
Link not Found
Manufacturer Code:44197
Enterprise Name:SAINT-GOBAIN INDUSTRIAL CERAMICS INC.
BU Name:SAINT-GOBAIN ABRASIVES, INC
Street:ONE NEW BOND STREET
P.O. Box:PO BOX 15008
City:WORCESTER
State:MA
Zip Code:01615-0008
Country:USA
Phone Number:1-508-795-5000
Fax Number:1-508-795-2828
Internet:www.saint-gobain-northamerica.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Link not Found
Link not Found
Manufacturer Code:1E1X8
Supply Number:CoMat 05-020
Type:sp01
Supply Short Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/33 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 320 (ANSI B74.18)
JCR-027 (JAEC REF)
JCR-186 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-021
Type:sp01
Supply Short Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/35 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 240 (ANSI B74.18 )
JCR-188 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
K6835
LOCAL
Manufacturer Code:LOCAL
Tool Number:Rivet squeezer
Tool Name:Rivet squeezer
Manufacturer Code:LOCAL
Tool Number:Sheet fastener
Tool Name:Sheet fastener