DMC:V2500-A0-72-00-5005-01A-649A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-50-300-009 LPT Module - Manifold Brackets - Replace The Plate Nut, Repair-009 (VRS1056)
Material of component
PART IDENT | SYMBOL | MATERIAL |
|---|---|---|
Manifold bracket | 15Cr-25.5Ni-1.2Mo-2.1Ti-0.3V- | |
0.006B steel |
General
NOTE
Other consumable materials are given in the SPM.
To identify the consumable material refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Rivet squeezer | LOCAL | Rivet squeezer | ||
| Sheet fastener | LOCAL | Sheet fastener |
Consumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 05-020 WATERPROOF SILICON CARBIDE | LOCAL | CoMat 05-020 | ||
| CoMat 05-021 WATERPROOF SILICON CARBIDE | 44197 | CoMat 05-021 |
Spares
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Rivet | MS20427M3-3 | 2 | ||
| Plate nut | MS21048-3 | 1 | ||
| Rivet | MS20427M3-3 | 2 | ||
| Plate nut | MS21048-3 | 1 |
Safety Requirements
NONEProcedure
Refer to Figure.
SUBTASK 72-00-50-350-060 Remove the Plate Nut from the Manifold Bracket
Refer to Figure.
Use rivet squeezer and sheet fastener. Refer to TASK 70-39-03-390-501.
Install new rivets into the hole in the manifold bracket.
SUBTASK 72-00-50-350-061 Install the New Plate Nut to the Manifold Bracket
Figure: Replacement of the plate nut (Typical)
Replacement of the plate nut (Typical)

