DMC:V2500-A0-72-00-6001-00A-920A-CIssue No:002.00Issue Date:2018-02-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-00-60-300-002 External Gearbox Module - Brackets - Replace The Inserts, Repair-002 (VRS1128)
Material of component
DESCRIPTION | RR SYMBOL | MATERIAL |
|---|---|---|
Bracket | TAW | Titanium alloy |
Bushing | EAK | Corrosion resistant steel |
General
This Repair scheme gives the procedure for replacing inserts of the brackets.
The practices and processes referred to in the procedure by the TASK number are in the SPP.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Insert, screw thread | AGS3732 | |||
| Insert, screw thread | AGS3732 |
Safety Requirements
NONEProcedure
Refer to the SPM TASK 70-35-08-300-501.
Remove and discard damaged inserts.
Refer to the SPM TASK 70-35-08-300-501.
Fit new inserts.
SUBTASK 72-00-60-350-052 Replace Damaged Inserts
Refer to the SPM TASK 70-21-01-220-501.
Visually examine repaired area.
SUBTASK 72-00-60-220-071 Examine Repaired Area