TASK 72-31-11-300-027 Annulus Filler - Touch UpThe Heat Resisting E.S. Coating, Repair-027 (VRS1016)

DMC:V2500-A0-72-31-1102-01A-609A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-31-11-300-027 Annulus Filler - Touch UpThe Heat Resisting E.S. Coating, Repair-027 (VRS1016)

Effectivity

FIG/ITEM

PART NO.

01-100

5A0353

01-100

5A6533

01-100

5A1459

01-100

5A1611

01-100

5A1638

01-100

5A1710

01-100

5A1750

01-100

5A1752

01-100

5A1753

01-100

5A1854

Material of component

PART IDENT

SYMBOL

MATERIAL

Annulus filler

Aluminum alloy

General

Price and availability - none

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 05-020 WATERPROOF SILICON CARBIDELOCALCoMat 05-020
CoMat 05-021 WATERPROOF SILICON CARBIDE44197CoMat 05-021
CoMat 01-275 CHROMATE CONVERSION COATING FOR ALUMINIUMLOCALCoMat 01-275
CoMat 02-004 PAINT BRUSHLOCALCoMat 02-004
CoMat 07-007 TWO-PACK EPOXY FINISH (WHITE) AND CATALYSTLOCALCoMat 07-007
CoMat 07-008 RED OXIDE TOUCH-UP PRIMER0AM53CoMat 07-008

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-31-11-350-082 Prepare the Part to Apply the Heat Resisting E.S. Coating

      2. Clean the prepared area.

      1. Refer to the SPM TASK 70-11-26-300-503.

    2. SUBTASK 72-31-11-380-068 Apply the Surface Protection Coating

      1. Apply the chromate conversion coating with a brush to the prepared area.

      1. Refer to the SPM TASK 70-38-02-300-503.

    2. Clean the repaired area with cold water and dry air blast.

    3. SUBTASK 72-31-11-380-069 Apply the Heat Resisting E.S. Coating to the Annulus Filler Assembly

    1. Refer to Figure.

      2. Apply the primer to the repaired area.

      1. Refer to the SPM TASK 70-38-20-300-503, SUBTASK 70-38-20-380-002.

      3. Apply the heat resisiting E.S. coating to the repaired area.

      1. Refer to the SPM TASK 70-38-20-380-501, SUBTASK 70-38-20-380-002.

    4. SUBTASK 72-31-11-210-051 Examine the Heat Resisting E.S. Coating

      1. Examine the coating surface.

      1. Refer to the SPM TASK 70-38-20-380-501, SUBTASK 70-38-20-380-001.

    5. Figure: Annulus Filler Assembly - Heat resisting E.S. coating area

    Annulus Filler Assembly - Heat resisting E.S. coating area

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:44197
Enterprise Name:SAINT-GOBAIN INDUSTRIAL CERAMICS INC.
BU Name:SAINT-GOBAIN ABRASIVES, INC
Street:ONE NEW BOND STREET
P.O. Box:PO BOX 15008
City:WORCESTER
State:MA
Zip Code:01615-0008
Country:USA
Phone Number:1-508-795-5000
Fax Number:1-508-795-2828
Internet:www.saint-gobain-northamerica.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:00BB6
Supply Number:CoMat 01-275
Type:sp01
Supply Short Name:CoMat 01-275 CHROMATE CONVERSION COATING FOR ALUMINIUM
Supply Name:CoMat 01-275 CHROMATE CONVERSION COATING FOR ALUMINIUM
Specification Groups:
Doc NumberType
BONDERITE M-CR-1200S AEROJCR-047 (JAEC REF)
JCR-048 (JAEC REF)SPMC 206 (PW REF)
Suppliers:
ManufacturerRemarks
00BB6
71410
Manufacturer Code:LOCAL
Supply Number:CoMat 02-004
Type:sp01
Supply Short Name:CoMat 02-004 PAINT BRUSH
Supply Name:CoMat 02-004 PAINT BRUSH
Specification Groups:
Doc NumberType
SOFT CAMEL HAIR ARTIST PAINT BRUSH, 1-INCH WIDE
Suppliers:
ManufacturerRemarks
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-020
Type:sp01
Supply Short Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/33 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 320 (ANSI B74.18)
JCR-027 (JAEC REF)
JCR-186 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-021
Type:sp01
Supply Short Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/35 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 240 (ANSI B74.18 )
JCR-188 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
K6835
LOCAL
Manufacturer Code:5HCF1
Supply Number:CoMat 07-007
Type:sp01
Supply Short Name:CoMat 07-007 TWO-PACK EPOXY FINISH (WHITE) AND CATALYST
Supply Name:CoMat 07-007 TWO-PACK EPOXY FINISH (WHITE) AND CATALYST
Specification Groups:
Doc NumberType
+BASE EC75/802 WHITE
OMAT: 795 (RR REF)GLOSS CATALYST ACT 65 or MATT CATALYST ACT 68
Suppliers:
ManufacturerRemarks
5HCF1
K5635
K6835
Manufacturer Code:X111X
Supply Number:CoMat 07-008
Type:sp01
Supply Short Name:CoMat 07-008 RED OXIDE TOUCH-UP PRIMER
Supply Name:CoMat 07-008 RED OXIDE TOUCH-UP PRIMER
Specification Groups:
Doc NumberType
DELETED
Suppliers:
ManufacturerRemarks
X111X