TASK 72-32-17-100-004 No. 2 And 3 Bearing Compartment Oil Jets - Clean, Cleaning-004

DMC:V2500-A0-72-32-1703-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-17-100-004 No. 2 And 3 Bearing Compartment Oil Jets - Clean, Cleaning-004

Effectivity

FIG/ITEM

PART NO.

01-400

5A1701

01-400

5A5385

01-500

5A1643

01-500

5A5348

General

This TASK gives the procedure to clean the oil jet assembly. For the other parts of the No. 2 bearing support and probe bracket, refer to TASK 72-32-17-100-000 (CLEANING-000).

The practices and processes referred to in the procedure by the TASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC.

References

Cleaning - General Information, SPM TASK 70-10-00-100-501

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Cleaning equipmentLOCALCleaning equipment

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-17-110-054 Remove the Soft Dirt and Dust

      1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-26-300-503.

      1. Use a soft bristle brush or swab.

      2. Dry.

      1. Use clean dry air blast or CoMat 02-099 LINT-FREE CLOTH.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X
Link not Found