TASK 72-32-20-440-001 No. 3 Bearing, Seal, HPC Shaft, And Gearshaft Assembly - Assemble The No. 3 Bearing, Rotor Center, And Support Assembly, Assembly-001 - DELETED

DMC:V2500-A0-72-32-2000-00A-710A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-20-440-001 No. 3 Bearing, Seal, HPC Shaft, And Gearshaft Assembly - Assemble The No. 3 Bearing, Rotor Center, And Support Assembly, Assembly-001 - DELETED

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. DELETED.

    1. Information transferred to TASK 72-32-20-440-001-A00 (ASSEMBLY, CONFIG-001) and TASK 72-32-20-440-001-B00 (ASSEMBLY, CONFIG-002).

Requirements After Job Completion

Follow-On Conditions

NONE