TASK 72-32-36-300-012 No. 2 And No. 3 Bearing Oil Distributor And Tubes - Replace The locating pin Of The Sub Oil Distributor Assembly, Repair-012 (VRS1258) - DELETED

DMC:V2500-A0-72-32-3600-01A-920A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-36-300-012 No. 2 And No. 3 Bearing Oil Distributor And Tubes - Replace The locating pin Of The Sub Oil Distributor Assembly, Repair-012 (VRS1258) - DELETED

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. DELETED.

    1. This TASK transferred to CMM Miscellaneous Mechanical Pub Ref CMM-MECH-V2500-1IA, TASK 72-32-36-300-012 (REPAIR-012)

Requirements After Job Completion

Follow-On Conditions

NONE