TASK 72-32-36-100-403 No. 2 And 3 Bearing Oil Distributor And Tubes - Related Parts - Clean The Sub Oil Distributor, Cleaning-003

DMC:V2500-A0-72-32-3600-02A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-36-100-403 No. 2 And 3 Bearing Oil Distributor And Tubes - Related Parts - Clean The Sub Oil Distributor, Cleaning-003

Effectivity

FIG/ITEM

PART NO.

01-400

5A0328

01-400

5A0944

01-400

5A1266

General

This TASK gives the procedure to clean the sub oil distributor. For the other parts of the No.2 and 3 bearing oil distributor and tube, refer to Cleaning-000 TASK 72-32-36-100-400.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC.

NOTE

To identify the consumable materials refer to the PCI.

References

Refer to the SPM for data on these items.

Cleaning - General Information, SPM TASK 70-10-00-100-501.

Make-up of the Solutions to Solvent Clean (All Metals), SPM TASK 70-11-26-100-501.

The Test and Control of the Solutions to Solvent Clean (All Metals), SPM TASK 70-11-26-200-502.

The Procedure to Solvent Clean (All Metals), SPM TASK 70-11-26-300-503.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-36-110-053 Remove the Soft Dirt and Dust

      1. Remove the soft dirt and dust. Refer to SPM TASK 70-11-26-300-503.

      1. Use a soft bristle brush or swab.

      2. Dry

      1. Use clean dry air blast or CoMat 02-099 LINT-FREE CLOTH.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X