TASK 72-32-41-300-002 No. 1 Bearing Support Assembly - Replace The Self Locking Clinch Nut, Repair-002 (VRS1271)

DMC:V2500-A0-72-32-4101-00A-920A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-41-300-002 No. 1 Bearing Support Assembly - Replace The Self Locking Clinch Nut, Repair-002 (VRS1271)

Effectivity

FIG/ITEM

PART NO.

01-240

5W2048

Material of component

RR

DESCRIPTION

SYMBOL

MATERIAL

No. 1 bearing support

11Cr-1Mo-0.85Mn-0.65Ni-0.25

V-0.15C Steel

General

Price and availability - none

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

For the method to clean the parts, refer to TASK 72-32-41-100-000 (CLEANING-000).

NOTE

  1. To identify the consumable materials refer to the PCI.

  2. Other consumable materials are given in the SPM.

NOTE

Special tools are identified in the procedure by the tool primary number.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
DrillLOCALDrill

0.377in. (9.58 mm)

MalletLOCALMallet
PunchLOCALPunch
Magnifying glass, 2xLOCALMagnifying glass, 2x
IAE 3J13502 Squeezer0AM53IAE 3J135021

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 05-020 WATERPROOF SILICON CARBIDELOCALCoMat 05-020
CoMat 05-021 WATERPROOF SILICON CARBIDE44197CoMat 05-021

Spares

NameManufacturerPart Number / IdentificationQuantityRemark
Clinch nut4W002718

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-41-350-052 Remove Damaged Clinch Nut

    1. Refer to Figure.

      2. Drill and remove flare of the clinch nut until the flare twists.

      1. Use a 0.377 in. (9.58 mm) diameter drill.

      3. Remove the clinch nut.

      1. Use a mallet and a punch.

      4. Remove sharp edges around the nut location hole.

      5. Clean the nut location hole.

      1. Use a soft clean cloth and air blast.

      6. Visually examine the nut location hole. SPM TASK 70-20-01-200-501.

      1. Visually examine the nut location hole for galls, burrs and/or scores using a 2X magnifying glass.

    2. SUBTASK 72-32-41-350-053 Install New Clinch Nut

    1. Refer to Figure.

      2. Fit new clinch nut into the location hole.

      1. Make sure that the clinch nut is installed correctly.

      3. Hold the clinch nut in position and make flare.

      2. Make sure that clinch nut is installed satisfactorily.

      4. Visually examine flare of the clinch nut for cracks. If cracked, replace.

      1. Refer to TASK 72-32-41-200-000 (INSPECTION-000) and the SPM TASK 70-20-01-200-501.

    3. Figure: Replacement of the clinch nut

    Replacement of the clinch nut

Requirements After Job Completion

Follow-On Conditions

NONE
Link not Found
Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:44197
Enterprise Name:SAINT-GOBAIN INDUSTRIAL CERAMICS INC.
BU Name:SAINT-GOBAIN ABRASIVES, INC
Street:ONE NEW BOND STREET
P.O. Box:PO BOX 15008
City:WORCESTER
State:MA
Zip Code:01615-0008
Country:USA
Phone Number:1-508-795-5000
Fax Number:1-508-795-2828
Internet:www.saint-gobain-northamerica.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Link not Found
Manufacturer Code:1E1X8
Supply Number:CoMat 05-020
Type:sp01
Supply Short Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-020 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/33 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 320 (ANSI B74.18)
JCR-027 (JAEC REF)
JCR-186 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
LOCAL
K6835
Manufacturer Code:1E1X8
Supply Number:CoMat 05-021
Type:sp01
Supply Short Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Supply Name:CoMat 05-021 WATERPROOF SILICON CARBIDE
Specification Groups:
Doc NumberType
OMAT: 5/35 (RR REF)WATERPROOF SILICON CARBIDE ABRASIVE PAPER, CAMI GRIT DESIGNATION 240 (ANSI B74.18 )
JCR-188 (JAEC REF)
Suppliers:
ManufacturerRemarks
1E1X8
K6835
LOCAL
Manufacturer Code:LOCAL
Tool Number:Drill
Tool Name:Drill
Manufacturer Code:0AM53
Tool Number:IAE 3J13502
Tool Name:IAE 3J13502 Squeezer
Manufacturer Code:LOCAL
Tool Number:Magnifying glass, 2x
Tool Name:Magnifying glass, 2x
Manufacturer Code:LOCAL
Tool Number:Mallet
Tool Name:Mallet
Manufacturer Code:LOCAL
Tool Number:Punch
Tool Name:Punch