DMC:V2500-A0-72-32-6001-05A-920A-CIssue No:001.00Issue Date:2013-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-32-60-300-010 LPC Bleed Duct - Replace The Insert, Repair-010 (VRS1913)
General
Price and availability - none
The practices and processes referred to in the procedure by the TASK number are in the SPM.
For the method to clean the parts, refer to TASK 72-32-60-100-000 (CLEANING-000)
NOTE
Consumable materials are given in the SPM.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Kit, Insert screw thread | LOCAL | Kit, Insert screw thread | ||
| Helicoil insert equipment | LOCAL | Helicoil insert equipment | (Refer to TASK V2500-00-70-35-08-00A-920A-D) |
Consumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 04-004 JOINTING COMPOUND, LIGHT GRADE | LOCAL | CoMat 04-004 | ||
| CoMat 07-070 ZINC CHROMATE PRIMER | IAE59 | CoMat 07-070 |
Spares
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| Insert | MS21209C0419 | 15 |
Safety Requirements
NONEProcedure
Refer to Figure.
Refer to the SPM TASK 70-35-08-300-501.
Remove the damaged Helicoil inserts.
SUBTASK 72-32-60-350-068 Remove the Damaged Inserts (01-264)
Refer to: Figure
Refer to the SPM TASK 70-35-08-300-501.
Install the new inserts.
SUBTASK 72-32-60-350-069 Install the New Insert (01-264)
Refer to the SPM TASK 70-35-08-300-501.
Examine the inserts and the repaired area.
SUBTASK 72-32-60-220-095 Examine the Installed Inserts (01-264)
Figure: Replacement of the insert
Replacement of the insert
