TASK 72-32-76-100-001 LPC Stage 2.5 Stator - Clean, Cleaning-001

DMC:V2500-A0-72-32-7600-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-76-100-001 LPC Stage 2.5 Stator - Clean, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-400

5R6088

01-400

5R0029

01-400

5R0097

01-400

5R0189

General

This TASK gives the procedure to clean the LP compressor stage 2.5 vanes.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

References

Refer to the SPM TASK 70-10-00-100-501 Cleaning - General Information.

NOTE

Consumable materials are given in the SPM TASK 70-11-26-300-503.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-76-110-051 Clean the LP Compressor Stage 2.5 Vanes

      1. Clean. Refer to the SPM TASK 70-11-26-300-503.

      1. Use lint free cloth.

Requirements After Job Completion

Follow-On Conditions

NONE