TASK 72-32-83-100-007 LPC Flange Bracket - Clean, Cleaning-007

DMC:V2500-A0-72-32-8351-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-83-100-007 LPC Flange Bracket - Clean, Cleaning-007

Effectivity

FIG/ITEM

PART NO.

02-300

5A0461

General

This TASK gives the procedure to clean the Bracket assembly

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Cleaning - General Information, SPM TASK 70-10-00-100-501

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-83-110-060 Remove the Soft Dirt and Dust

      1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-26-300-503.

      1. Use a soft bristle brush or swab.

Requirements After Job Completion

Follow-On Conditions

NONE