TASK 72-32-87-100-001 Fan Case Liner Panel Rubber Seal - Clean, Cleaning-001

DMC:V2500-A0-72-32-8701-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-87-100-001 Fan Case Liner Panel Rubber Seal - Clean, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-100

5A0819

01-100

5A1601

01-100

5A2139

01-150

5A0823

01-150

5A2140

01-150

5A2179

01-150

5A2190

01-200

5A0824

01-200

5A2141

01-250

5A0825

01-250

5A2142

01-300

5A0827

01-300

5A2143

01-300

5A2180

01-300

5A2191

01-350

5A0828

01-350

5A2144

01-400

5A0829

01-400

5A2145

01-400

5A2181

01-400

5A2192

01-450

5A0830

01-450

5A2146

01-500

5A0831

01-500

5A2147

01-550

5A0832

01-550

5A2148

01-550

5A2182

01-550

5A2193

General

This TASK gives the procedure to clean the panel rubber seal. For the other fan case rear panel parts, refer to TASK 72-32-87-100-000 (CLEANING-000).

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Cleaning equipmentLOCALCleaning equipment

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-87-110-051 Remove the Soft Dirt and Dust

      1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-26-300-503.

      1. Do not immerse. Use a soft bristle brush or swab.

      2. Dry.

      1. Use clean dry air blast or CoMat 02-099 LINT-FREE CLOTH.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X
Link not Found