DMC:V2500-A0-72-38-1101-00A-250A-CIssue No:003.00Issue Date:2014-11-01
Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-38-11-100-002 Inlet Cone Assembly - Clean, Cleaning-002
General
This TASK gives the procedure to clean the inlet cone.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
NOTE
To identify the consumable materials refer to the PCI.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
| Name | Manufacturer | Part Number / Identification | Quantity | Remark |
|---|---|---|---|---|
| CoMat 01-124 ISOPROPYL ALCOHOL | LOCAL | CoMat 01-124 |
Spares
NONESafety Requirements
NONEProcedure
Do not immerse.
Use a soft bristle brush or a swab.
Remove the soft dirt and dust. Refer to SPM TASK 70-11-26-300-503.
Use clean dry air blast or clean lint-free cloth.
Dry the inlet cone assembly.
SUBTASK 72-38-11-110-052 Remove the Soft Dirt and Dust