TASK 72-45-14-300-023 HPT Stage 1 Blade - Blend Repair To Remove Extended Cracks From The Underplatform Cooling Holes, Repair-023 (VRS3686)

DMC:V2500-A0-72-45-1401-03A-649A-C|Issue No:002.00|Issue Date:2014-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-45-14-300-023 HPT Stage 1 Blade - Blend Repair To Remove Extended Cracks From The Underplatform Cooling Holes, Repair-023 (VRS3686)

Effectivity

FIG/ITEM

PART NO.

01-010

2A2621

01-010

2A2621-001

01-010

2A2621-002

01-010

2A2621-003

01-010

2A8321

01-010

2A8321-001

01-010

2A8321-002

01-010

2A8321-003

01-010

2A8521

01-010

2A8521-001

01-010

2A8521-002

01-010

2A8521-003

01-010

2A8701

01-010

2A8701-001

01-010

2A8701-002

01-010

2A8801

01-010

2A9001

01-010

2A9101

01-010

2A9201

Material of component

PART IDENT

SYMBOL

MATERIAL

Stage 1 HPT blade assembly

-

Cast nickel base alloy

General

Price and availability - none

The practices and processes referred to in the procedure by the TASK number are in the SPM.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Repair Facilities

    1. The Source Demonstration requirements of this repair means that any facility not authorized to accomplish this repair either, utilize the Authorized Repair Vendors listed below or contact the IAE Repair Services Group to determine if a qualification program can be initiated at their facility.

      IAE INTERNATIONAL AERO ENGINES AG
      400 Main Street, M/S 121-10
      East Hartford, CT 06118
      USA
      Attn: Manager Repair Services
    2. Authorized repair vendor for Repair VRS3686 TASK 72-45-14-300-023 (REPAIR-023) is listed below:
      Turbine Overhaul Services Pte, Ltd. (TOS)
      5 Tuas Drive Two - Mail Stop 107-58
      Singapore 638639
      Tel: 65-6860-2260
      Fax: 65-6862-1068
    3. The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable him to carry out the listed repair work. However, IAE make no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.
Requirements After Job Completion
Follow-On Conditions
NONE
Change Type: 
Added approved repair vendor. Revised IAE address. (14VC339)