TASK 72-50-33-300-035 LPT Stage 3 Rotating Airseal - Weld Build Up Repair, Repair-035 (VRS4246)

DMC:V2500-A0-72-50-3303-01A-627A-C|Issue No:002.00|Issue Date:2019-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-50-33-300-035 LPT Stage 3 Rotating Airseal - Weld Build Up Repair, Repair-035 (VRS4246)

Effectivity

FIG/ITEM

PART NO.

01-200

3A0963

Material of component

PART IDENT

IAE SYMBOL

MATERIAL

Stage 3 turbine airseal

Waspaloy

General

Price and availability - Refer to IAE.

Make sure that the necessary cleaning and inspection procedures are done before this repair.

Repair Facilities

The source demonstration requirements of this repair means that any facility not authorized to accomplish this repair either, utilize the authorized repair vendors listed below or contact the IAE repair services group to determine if a qualification program can be initiated at their facility.

IAE International Aero Engines AG

400 Main Street, M/S 121-10

East Hartford, CT 06118

USA

Attn: Manager Repair Services

Authorized repair vendors for Repair VRS4246 TASK 72-50-33-300-035 (REPAIR-035) are listed below:

MTU Aero Engines AG

Dachauer Strasse 665

80995 Muenchen

Germany

MTU Maintenance GmbH

Muenchner Strasse 31

30855 Langenhagen

Germany

The designation by IAE of an authorized repair vendor indicates that the repair vendor has demonstrated the necessary capability to enable him to carry out the listed repair work. However, IAE make no warranties or representations concerning the qualifications or quality standards of the repair vendors to carry out the repair work, and accepts no responsibility whatsoever for any work that may be carried out by a repair vendor, other than when IAE is listed as the repair vendor. Authorized repair vendors do not act as agents or representatives of IAE.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revision Update. (89VM516F)