TASK 72-50-51-100-105 No. 5 Bearing Oil Nozzle Filter - Clean, Cleaning-005

DMC:V2500-A0-72-50-5103-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-50-51-100-105 No. 5 Bearing Oil Nozzle Filter - Clean, Cleaning-005

Effectivity

FIG/ITEM

PART NO.

01-100

4P8034

General

This TASK gives the procedure to clean the oil filter. For the other parts of the No.5 bearing oil jet and filter, refer to Cleaning-000 TASK 72-50-51-100-100.

The practices and processes referred to in the procedure by the TASK/SUBTASK numbers are in the SPM.

NOTE

To identify the consumable materials refer to PCI.

Reference

Refer to the SPM for data on these items.

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-50-51-110-057 Clean the Filter

      1. Clean, Refer to SPM TASK 70-11-03-300-503.

      1. Aqueous degrease

      2. Clean, Refer to SPM TASK 70-11-13-300-503.

      1. Alkaline rust remover (long soak).

Requirements After Job Completion

Follow-On Conditions

NONE