TASK 73-12-41-100-401 Fuel Pumps - Related Parts - Clean The Adapter Housing, Cleaning-001

DMC:V2500-A0-73-12-4100-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 73-12-41-100-401 Fuel Pumps - Related Parts - Clean The Adapter Housing, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-160

5A0248

01-160

5A1401

01-160

5009090

General

This TASK gives the procedure to clean the adapter housing.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Refer to the SPM for data on these items.

Cleaning Policy and Methods, TASK 70-10-00-100-501.

Make-up of the Solutions to Solvent Clean, SPM TASK 70-11-26-100-501.

The Test and Control of the Solutions to Solvent Clean, SPM TASK 70-11-26-200-502.

The Procedure to Solvent Clean, SPM TASK 70-11-26-300-503.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 73-12-41-110-052 Clean the Adapter Housing to Remove the Soft Dirt and Dust

    1. Remove the soft dirt and dust. Refer to SPM TASK 70-11-26-300-503.

Requirements After Job Completion

Follow-On Conditions

NONE