TASK 73-22-34-100-402 EEC And Terminal Block Assembly - Related Parts - Clean The EEC Support, Cleaning-002

DMC:V2500-A0-73-22-3400-03A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 73-22-34-100-402 EEC And Terminal Block Assembly - Related Parts - Clean The EEC Support, Cleaning-002

Effectivity

FIG/ITEM

PART NO.

01-010

2A1349-01

01-010

2A1370-01

01-060

2A0954-01

01-060

2A1367-01

General

This TASK gives the procedure to clean the EEC support. For other EEC parts, refer to TASK 73-22-34-100-400.

The practices and processes referred to in the procedure by the TASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

References

Refer to the SPM for data on these items.

Cleaning Policy, Refer to SPM TASK 70-10-00-100-501.

Cleaning Methods, Refer to SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 73-22-34-110-054-001 Remove Unwanted Particles

      1. Remove unwanted particles. Refer to SPM TASK 70-11-06-300-503.

      1. Quick soak for titanium parts only.

    2. SUBTASK 73-22-34-110-054-002 Remove Unwanted Particles

      1. Remove unwanted particles. Refer to SPM TASK 70-11-26-300-503.

      1. Solvent clean (titanium and all other metals).

    3. SUBTASK 73-22-34-110-054-003 Remove Unwanted Particles

      1. Remove unwanted particles. Refer to SPM TASK 70-11-03-300-503.

      1. Solvent cleaning.

Requirements After Job Completion

Follow-On Conditions

NONE